CDS – Comac Dosing System

The Comac technology for reducing the flow, cutting waste and improving cleaning performance

These days, there is an increasing call for heavy duty and durable cleaning, and for this reason, in addition to the mechanical action of Comac machines, the correct dosage of the chemical product enables better and more lasting results to be achieved.
The solution is CDS – Comac Dosing System – the water and detergent dosing system designed by Comac which, thanks to two separate selectors, enables the operator to dose the water and detergent separately.
This means that the amount of solution can be immediately adapted to the specific dirt to be cleaned, thus eliminating the excesses that can occur with traditional floor scrubbers.

BENEFITS

  • Up to 50% reduction in chemical product waste
  • Up to 50% reduction in waste of the water used for cleaning operations
  • Improved performance, as the solution outlet in the center of the brush(es) enables even distribution over the entire surface. In addition, waste due to spraying to the sides is also reduced
  • Thanks to the ability to easily replace the detergent canister, different types of chemicals can be brought to the work site, allowing a specific product to be used for each area to be treated without wastage, as could occur with a traditional machine
  • Customization of the distribution of the solution directly from the instrument panel of the machine
  • The correct dosing of the chemical product makes it possible to prevent deposits from forming on the floor and thus compromising the shine, or even worse, making it slippery to the detriment of safety
  • Optimization of cleaning times, as it enables the machine to work for longer with a single tank, thus reducing the time taken to fill with water and drain